Custom Marine Sunshades · Since 1974

Boston Whaler Sun Shades, Built to Your Hull

Boston Whaler builds a boat that outlives its owner. The factory T-top shades the helm and almost nothing else, so the bow seating, the casting deck, and the cockpit sit in full sun from ten in the morning onward.

We fix that with a Sunshade patterned to your exact hull. National Canvas has sewn marine canvas since 1974, 52 years, and every shade is cut from measurements taken off your boat rather than off a size chart. Bow, aft, or both. It flies tight and clean at anchor, one person raises it in under 60 seconds with no tools, and it stows in its bag when you want the deck back.

Full kits from $1,895 with poles and mounts included, or $845 for the panel alone if you already have hardware you like. Free shipping anywhere in the United States.

We are not affiliated with Boston Whaler. We build canvas that fits their boats.

Bow, aft, or both

Bow shade. Flies forward off the T-top over the bow seating and the casting deck. Families ask for this one first, because the bow is where everyone ends up once the anchor is down.

Aft shade. Runs back off the T-top over the cockpit and the leaning post. This is the fishing answer, and it keeps the sun off the deck you actually stand on.

Both. Two separate panels off the same top, nothing overlapping, either one down on its own. Ordered together they save about 10%.

Whalers we build for

  • Montauk. Often no T-top, or a low one. Freestanding telescoping poles do the work, and it is one of the simplest shades we build.
  • Dauntless. Bow shade over the forward seating, run off the hardtop or off poles.
  • Outrage. T-top boat, so the full menu is open. Larger hulls usually want four poles rather than two.
  • Vantage and Conquest. Aft cockpit coverage off the hardtop, sized around how the seating folds.
  • Guardian. We build for the commercial and fleet versions too. See our government contracting page.

Not on the list? It does not matter. We pattern to your measurements, not to a catalog. See all our custom center console sun shades.

Questions

Boston Whaler Sun Shades FAQ

Which Boston Whaler models can you build a Sunshade for?

All of them, from the small tiller boats up past 40 feet. Montauk, Dauntless, Outrage, Vantage, Conquest, Super Sport, and the Guardian fleet hulls. We build to your measurements rather than to a model list, so a hull we have never seen is not a problem. If your Whaler has a T-top or a hardtop we can run the shade forward, aft, or both. If it has no top at all, freestanding telescoping poles handle it.

Do you have to drill into my Boston Whaler T-top?

Usually not. The poles drop straight into rod holders you already have, and the mounting hardware attaches with four screws or fewer, often none at all. Where a mount is needed we use low-profile 316 stainless quick-release fittings and we tell you exactly where they go before anything is installed. Nothing about the install is irreversible.

Can I use my existing rod holders to hold the poles?

Yes, and most owners do. Standard rod holder spacing on a Whaler T-top or gunwale works fine with our telescoping poles, which is part of why the install is so quick. Send us your rod holder positions with your measurements and we set the shade geometry around them.

How much is a Sunshade for a Boston Whaler?

Full kits start at $1,895 with poles and mounts included, and the panel on its own starts at $845 if you already have track or poles. Where you land depends on hull length, pole count, carbon fiber versus stainless, and fabric. A two-pole aft shade on a Montauk sits near the bottom. A bow and aft package on a 32 foot Outrage with carbon poles sits near the top. Every quote is fixed price with the full build spec written out before you approve it.

Get the sun off your Whaler

Send your model and length and we will come back with a fixed price on a shade built to your hull.

Or call (561) 270-6922
Free Quote Within One Business Day

Tell us about your Boston Whaler

Send a few details and a couple of photos and we reply with a fixed price on a shade built for your boat. Local to South Florida? We come to you. Anywhere else in the country? We ship you a kit.

Prefer to talk? Call or text (561) 270-6922, 8am to 4pm ET Monday to Friday.
This field is for validation purposes and should be left unchanged.
Two photos help most: your T-top from the side, and your rod holders. Photos on your phone? You can also text them to (561) 270-6922.
Drop files here or
Accepted file types: jpg, jpeg, png, heic, webp, Max. file size: 20 MB, Max. files: 4.

    Let's Talk

    This field is for validation purposes and should be left unchanged.

    Start Your Project

    Let’s start the conversation. Share a few details and we will be in touch.